Paralinx Tomahawk2 Transmitters & Receivers (a la carte)

Thank you for your interest in Teradek Products.

We will send you an email when this item is in stock and ready to ship.

The Paralinx Tomahawk2 is a long-range HD video system offering real-time wireless HD transmission for your Television, Film, Broadcast, Industrial or UAV/UAS application.

The Tomahawk2 features several improvements from the original Tomahawk:

  • Dual-Input Transmitter (HD-SDI & HDMI)
  • Receiver is lighter and 60% smaller
  • Input voltage range is now 6-28V on Transmitter
  • Machined-aluminum Receiver enclosure improves durability
  • Integrated 1/4-20 & 4-40 mounting points on Tx/Rx
  • Compatible with Teradek Sidekick (1stGen)
  • Compatible with Teradek Bolt 2000, Sidekick1, or Paralinx Tomahawk (1st Gen)*
  • All Transmitter+Receiver sets include custom case

The Paralinx Tomahawk2 has a range of up to 2000 feet** (600m) and maintains an incredible <1ms latency glass-to-glass. Both the transmitter and receiver feature 2-Pin power connectors and the transmitter features a wide 6-28V input voltage range (receiver has 7-17V input). The Tomahawk2 system features both 3G-SDI input (with loop-out) & HDMI input on the transmitter, and a 3G-SDI output on the receiver.

The Tomahawk2 transmits Full-HD video (up to 1080p/60 4:2:2) and is capable of sending video to up to 4 receivers simultaneously. The transmitter weighs approximately 7.3oz/208g (without antennas) and the receiver weighs only 8.9oz/252g (without antennas).

 

Tomahawk2 Features:

  • Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload

  • Transmitter features both 3G-SDI & HDMI inputs and SDI loop-out. Receiver features 3G-SDI output.

  • Rugged machined-aluminum enclosure for both the transmitter and receiver

  • Ultra long-range transmission - Up to 2,000 feet (600 meters) **

  • REAL-TIME viewing - Less than 1 millisecond latency

  • Visually lossless full-HD video signal allow critically accurate monitoring

  • Multicast capable (up to 4 receivers per transmitter)

  • 128 bit AES Encryption - Secure transmission

  • Operates on 5gHz frequency band

  • Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications

  • Click here for supported frame rates


*When linked to a Bolt 2000 or Paralinx Tomahawk (1st Gen) unit the following features are not supported: PsF video, Run/Stop, Timecode

**Range may vary depending on environment and interference


Dimensions (Tx): 4.1in x 2.6in x 0.9in (not including antennas/connectors)
Dimensions (Tx): 104mm x 66mm x 22mm
Weight (Tx): 7.3oz / 208g (without antennas)

Dimensions (Rx): 4.6in x 3.5in x 0.9in (not including antennas/connectors)
Dimensions (Rx): 117mm x 88mm x 22mm
Weight (Rx):  8.9oz / 252g (without antennas)



Transmitter-only Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
1x PTap to 2-pin power cable
1x 18in/45cm BNC cable (right-angle to right-angle)
1x 18in/45cm HDMI cable
2x 5dbi omnidirectional antennas
1x Mini-USB to USB cable (for firmware updates)

Receiver-only Kits include:
1x Tomahawk2 SDI Receiver
1x AC power supply with 2-pin connector
1x 18in/45cm BNC cable (right-angle to right-angle)
5x 2dbi omnidirectional antennas
1x Lightstand adapter
1x Mini-USB to USB cable (for firmware updates)

 

PLEASE NOTE: Additional Power Cables for the Tomahawk2 system must be purchased separately. PTap to 2-pin, 2-pin to 2-pin, and JST-RCY to 2-pin options are available.

What's In The Box?

Support

FAQs

Loading...

Recommended Accessories

Capture.Share.

*Manufactured under licence
Our Brands